home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1998 February
/
CHIP Şubat 1998.iso
/
drivers
/
GRAFIK
/
HERCULES
/
TERM
/
WIN95
/
MPEG
/
T64_3D
/
WIN95DIR.Z
/
CPX.INI
< prev
next >
Wrap
INI File
|
1996-03-14
|
7KB
|
124 lines
[Hardware]
BoardType=Combo
ClockDivider=444
; The [Hardware] section should contain one of the following formats,
; depending on the type of ScenicMX2 board to be supported:
;
;-------------------------------------------------------------------;
; 1. "S3 Inc. Scenic/MX2 & Trio64V PCI TMP Board" ;
; (all-in-one Combo board) ;
; ;
; or ;
; ;
; "S3 Inc. Scenic/MX2 Daughter Card" mated with ;
; "S3 Inc. Trio64V 1-2MB PCI TMP Board" (daughter card Combo) ;
; ;
; or ;
; ;
; "S3 Inc. Scenic/MX2 TMP Board" mated with ;
; "S3 Inc. ViRGE PCI Board" (daughter card Combo) ;
; ;
; or ;
; ;
; "STB Systems Inc. Scenic/MX2 Daughter Card" mated with ;
; "STB Systems Inc. ViRGE PCI Board" (daughter card Combo) ;
;-------------------------------------------------------------------;
; [Hardware]
; BoardType=Combo ; S3 PCI Combo Board.
; ClockDivider=444 ; MCLK speed (40 MHz).
; ; IRQ and IRQ Letter are determined by driver.
; ; In this configuration, any other settings
; ; such as IRQ or IRQLetter are ignored.
;
;-------------------------------------------------------------------;
; 2. "Tiger Board" ;
;-------------------------------------------------------------------;
; [Hardware]
; BoardType=Tiger ; Tiger Board.
; ClockDivider=444 ; MCLK speed (40 MHz).
; ; IRQ and IRQ Letter are determined by driver.
; ; In this configuration, any other settings
; ; such as IRQ or IRQLetter are ignored.
;
;-------------------------------------------------------------------;
; 3. "S3 Inc. CP3 Validation Board" (ISA card) connected to ;
; "S3 Inc. Trio64V 1-2MB PCI TMP Board" ;
; ;
; or ;
; ;
; "S3 Inc. TV Tuner/MPEG TMP Board (ISA card)" connected to ;
; "S3 Inc. Trio64V 1-2MB PCI TMP Board" ;
; ;
; or ;
; ;
; "S3 Inc. TV Tuner/MPEG TMP Board (ISA card)" connected to ;
; "S3 Inc. ViRGE PCI Board" ;
;-------------------------------------------------------------------;
; [Hardware]
; BoardType= ; S3 ISA CP3 Validation Board.
; ClockDivider=444 ; MCLK speed (40 MHz).
; IRQ=7 ; Fixed ISA IRQ line to be used.
; ; Note: IRQ must be between 3 and 7.
; ; Note: IRQ letter is determined by driver
; ; by default, assuming an S3 ISA CP3 board.
;
;-------------------------------------------------------------------;
; 4. Example of a user-defined PCI board in which Scenic/MX2 ;
; shares a PCI IRQ line with Trio64V+. In this configuration, ;
; the driver will determine the IRQ number automatically. ;
;-------------------------------------------------------------------;
; [Hardware]
; BoardType= ; Example for a user-defined PCI board.
; ClockDivider=444 ; MCLK speed (40 MHz).
; IRQ=Trio64V ; Use PCI IRQ line assigned to Trio64V.
; IRQLetter=PCI ; Use PCI interrupt pin on ScenicMX2.
;
;-------------------------------------------------------------------;
; 5. Example of a user-defined PCI board in which Scenic/MX2 has ;
; its own IRQ line, separate from Trio64V+. The IRQ number ;
; must be supplied by the user or by a configuration utility. ;
;-------------------------------------------------------------------;
; [Hardware]
; BoardType= ; Example for a user-defined PCI board.
; ClockDivider=444 ; MCLK speed (40 MHz).
; IRQ=9 ; Fixed PCI IRQ line to be used.
; IRQLetter=PCI ; Use PCI interrupt pin on ScenicMX2.
;
;-------------------------------------------------------------------;
; 6. Example of a user-defined ISA board. The IRQ number must be ;
; supplied by the user or by a configuration utility. In this ;
; example the IRQ letter, which specifies which pin on the ;
; Scenic/MX2 chip will be used for the IRQ, is set to a fixed ;
; value (IRQ pin A). ;
;-------------------------------------------------------------------;
; [Hardware]
; BoardType= ; Example for a user-defined ISA board.
; ClockDivider=444 ; MCLK speed (40 MHz).
; IRQ=7 ; Fixed ISA IRQ line to be used.
; ; Note: IRQ range depends on board hardware.
; IRQLetter=A ; Fixed IRQ pin to be used on ScenicMX2.
; ; Note: IRQ Letter must be between A and E.
;
;-------------------------------------------------------------------;
; 7. Example of a user-defined ISA board. The IRQ number must be ;
; supplied by the user or by a configuration utility. In this ;
; example the IRQ letter, which specifies which pin on the ;
; Scenic/MX2 chip will be used for the IRQ, is calculated from ;
; the IRQ number by using a string that shows how each IRQ ;
; number should be mapped to a corresponding IRQ letter. ;
; This scheme is used if the IRQLetter string contains 16 or ;
; more characters. ;
;-------------------------------------------------------------------;
; [Hardware]
; BoardType= ; Example for a user-defined ISA board.
; ClockDivider=444 ; MCLK speed (40 MHz).
; IRQ=7 ; Fixed ISA IRQ line to be used.
; ; Note: IRQ range depends on board hardware.
; IRQLetter=000ABCDE00000000 ; List showing how IRQ number is mapped
; ; to corresponding IRQ letter. For example,
; ; IRQ 7 is mapped to IRQ letter E.
; ; Note: valid IRQ letters are A to E.